Unique chemical vapour neutralising technology. Removes toxic chemical vapours including H2S, SO2 and NO2.
Each system is designed and scaled bespoke to each field condition.This skid mounted unit was designed for low pressure, high flow gas stream with 300ppm H2S.
Chemical vapours or hydrocarbons are trapped on the surface of the FAST-ACT molecule and neutralised. Normal filters are only carbon and Hepa. Filters can be pads or cartridge embedded with FAST-ACT granules.
Protection of internal areas such as:
•Accommodation •Offices •Control Rooms •Tank vents •Manhole filters
Soft filter or honeycomb membrane. Long life and easily retro fitted into existing HVAC’s and ducting.
• Continuous monitoring of drilling returns (mud and cuttings) for H2Srelease. FAST-ACT Cylinders
• Addition of H2S scavenger (FAST-ACT) in drilling and completion fluid formulations;
• Negative pressure ventilation and air locks in mud-processing rooms FAST-ACT Filters
• Local exhaust ventilation over the shale shakers; FAST-ACT Filters
Removal of H2S from Mud, Sand and Oil pits prior to Derrickmen entry FAST-ACT Cylinders.
Due to our high efficacy, FAST-ACT removal systems with small footprint can provide clean gas for power and H2S removal of well gas, minimising flaring.
FAST-ACT is the ONLY technology that can discharged directly into a toxic chemical vapour for adsorption and removal/neutralisation of hazardous vapours.
Toxic chemical vapour releases in confined spaces, cargo tanks and containers.
FAST-ACT is directly injected into a tank or confined area to adsorb any vapours and coat the surface to prevent off-gassing. FAST-ACT will settle and can be rinsed off and cleaned with water. Meets IMO / GESAMP requirements for the marine environment.
© Copyright Clean Stream Technologies 2020