Use the masks enclosed to keep your coughs and sneezes covered and to reduce the risk of inhaling airborne contaminants such as infected droplets.
Certified International Standard EN14683:2019 + AC:2019
Discard mask after use or immediately if it becomes wet or soiled. (Do not re-use)Clean your hands immediately after touching used mask.
Tested to 99.9% bacterial filtration efficiency.
Masks are one size fits all but can be moulded to fit bridge of nose.
Contents: Adult sized 3ply disposable masks – single use
CLASS 1S (M) TYPE IIR
ARTG 336708. Pleat style with Ear Loops. Single use
The sterile mask is to be worn by medical personnel during surgical or other medical procedures, to prevent the transfer of airborne organisms while surgery is being performed, body fluids and particulate transfer.
Product CE marked as Directive 93 / 42 / EEC on Medical Device
Class of device : 1S(M)TYPE IIR
Product compliant with EN14683:2019 +AC:2019
CST-MASK-NP2V CLASS 1 NON STERILE
TGA - ARTG: 75345
Discard mask after use or immediately if it becomes wet or soiled. (Do not re-use) Clean your hands immediately after touching used mask.
Certified International Standard: EN149:2001+A1:2009
Tested to ≥95% bacterial filtration efficiency.
Certified International EN14683:2019 + AC:2019
Adult sized 3ply disposable masks - single use
Tested to >98% bacterial filtration efficiency
Masks are one size fits all but can be moulded to fit bridge of nose
CST-MASKNP2 CLASS 1 NON STERILE
TGA - ARTG: 72194
Certified International Standard: EN149:2001+AC:2009
Tested to ≥95% bacterial filtra)on efficiency.
The new VAPOURKLENZ™ disposable FFP3 Particulate EN149 respirator with H2S vapour neutralising technology.
Incorporating FAST-ACT™ nanomaterial technology, the VapourKlenz™ respirator is impregnated with a unique chemical neutralising granule that adsorbs and neutralises H2S toxic vapour encountered on a daily basis in the oil and gas industry around the world.
MODE OF ACTION:
VapourKlenz™ is a proprietary formulation of non-toxic nanocrystallline metal oxides that exhibit very high reactivity. Our technology uses ‘ionic bonding’ to adsorb chemical vapour and react, neutralising the toxic vapour.
© Copyright Clean Stream Technologies 2021